Monitoring HP 3PAR Storage Arrays using OpStor

OpStor provides monitoring and management of HP 3PAR Storage Arrays.

Features Supported

Prerequisites for monitoring HP 3PAR Storage Arrays

• OpStor uses HP 3PAR SMI-S provider for monitoring the Storage Array.
• The provider is by default embedded in the Storage Array.
• Ensure that the SMI-S provider is properly running.
• By Default, SMI-S provider embedded in HP 3PAR Storage Array would be disabled. Kindly enable it.

Steps to enable SMI-S provider

• Login to HP 3PAR Command Line Interface (CLI) using SSH.
• Enter the IP Address of HP 3PAR Storage Array, Username and Password (Default Credentials: 3paradm / 3pardata).
• Execute?startcim command at the CLI to enable the SMI-S provider.
• Execute showcim, to know the current status of the SMI-S Provider.
• To restart the SMI-S Provider,?
  • Execute?"stopcim –f –x"?
  • Then execute?"startcim"

Prerequisites for monitoring HP 3PAR Storage Arrays SNMP Traps

Steps to add OpStor server IP address as trap destination

• Connect to HP 3PAR CLI with an Administrator Account.
• Execute the following command? addsnmpmgr <OPSTOR_SERVER_IP>
• To register the manager with the agent, use the addsnmpmgr command followed by the?manager’s?IP address ie., addsnmpmgr <Manager_IP>
• If you need to use one of the following options, enter it after the command and before?the IP address.
  • -p <port_number> - Specifies the port number where the manager receives traps. The?default port 162.
  • -pw <password> - Specifies the manager’s access password, if the manager has one.
  • -r <number> - Specifies the number of times the system will attempt to resend the trap if the manager is not available. You can specify from 1 to 15 retries. The default is 2.
  • -t <seconds> - Specifies the number of seconds to wait between retries. You can set the timeout from 1 to 300 seconds. The default is 200.

NOTE: The InForm OS supports a maximum of 10 registered SNMP managers

• To view the Registered Manager, execute?showsnmpmgr
• To?send a test trap to all registered SNMP managers, use the command?checksnmp.?Please check the link for further clarification.?Reference

Steps to add HP 3PAR Storage Arrays in OpStor

• Navigate to Admin Tab --> Manage Storage Devices link in OpStor client
• Provide the IP Address of the array
• Choose the Device Type as 'RAID'
• Choose the Vendor as 'HP'
• Choose the Model as '3PAR'
• In the Username field, provide the SMI-S provider's username.
• In the Password field, provide the SMI-S provider's password.
• Provider the port number at which the CIM agent is running (5989 or 5988)
• Check whether SSL should be Enabled (https) or Disabled (http)
• Provide the namespace to connect to the provider. (by default root/tpd)
• If needed change the Timeout value (default is 180 seconds)
• Click on Add Device

Note : If the Ping facility is disabled for the device, then please uncheck 'Ping the given IP' field.
Note :?In case of non discovery of the device, please follow the troubleshooting tips displayed in the webclient and try re-adding the device.