Monitoring EMC VNX (Block) Storage Systems

OpStor provides monitoring and management of EMC VNX (Block) RAID Storage Systems

All EMC VNX Block Storage Arrays are supported.

• VNX Series
  • VNX5100
  • VNX5300
  • VNX5500
  • VNX5700
  • VNX7500

Features supported

Prerequisites for monitoring EMC VNX(Block)

OpStor uses command line utility (NaviCLI.exe/NaviSecCLI.exe) available as part of NaviSphere suite of EMC VNX(Block)

• NaviCLI/NaviSecCLI should be installed in the server in which OpStor is installed.
• Include the directory containing NaviCLI.exe/NaviSecCLI.exe in the PATH system environment variable. (This is normally C:\Program Files\EMC\Navisphere CLI\ ) by going into My Computer -> Properties -> Advanced -> Environmental Variables
• Ensure that OpStor is restarted (shutdown & started) after including NaviCLI/NaviSecCLI in the path.?This is required for the latest path changes to take effect for OpStor
• Now open a command prompt to execute the navicli command to check for the proper response from EMC VNX(Block)
  • Command : navicli -h <array name> getall (for systems with NaviCLI installed)
  • Command : naviseccli -h <array name> -scope 0 -user <storage system username> -password <storage system password> getall (for systems with NaviSecCLI installed)
  • Command:?naviseccli -h <array name> -scope 0 -user <storage system username> -password <storage system password> storagepool -list?(for systems with NaviSecCLI installed)
  • Command:?naviseccli -h <array name> -scope 0 -user <storage system username> -password <storage system password> lun -list?(for systems with NaviSecCLI installed)
• Ensure that, OpStor Installed machine is reachable from the Storage system

Steps to add EMC VNX(BLock) in OpStor

• In the OpStor client go to Admin Tab --> 'Discovery' Tab
• Provide?IP Address of EMC VNX Storage Processor
• Choose the Device Type as 'RAID'
• Choose the Vendor as 'EMC'
• Choose the Model as 'VNX-BLOCK'
• Provide the NaviSecCLI Username and Password
• Change the Timeout if needed
• Click on Add Device
• Repeat the above procedure to add the second array IP in case of dual Storage Processors

Note : If the Ping facility is disabled for the device, then please uncheck 'Ping the given IP' field.
Note :?In case of non discovery of the device, please follow the troubleshooting tips displayed in the webclient and try re-adding the device.?